12th scale Bannister railings Kit from the Petit Trianon, Main Staircase, Versaille
Exceptionally detailed sections of the bannister railings found in the Petit Trianon Versaille. 
There are two main panels that can be sperated with either a corner or a spacer. 
The bannisters are only the "horizontal" run and not suitable for the side of stairs. At the time of making them I decided that the staircase angle was too variable and would not satisfy all staircases. 
Each item can be purchased individually and each section has little prongs that can be fixed into predrilled holes in your model. 
 
Panel with the M motif
75mm high to top of handrail
85mm wide
 
Panel with the Oval motif
75mm high to top of handrail
85mm wide
 
Spacer section
7.7mm wide
75mm high to top of handrail
 
Corner section
10mm wide (excluding handrail)
75mm high to top of handrail
Notes
The kit is made from Pewter alloy (no lead) and is a very soft metal. If the panels or the spacer is slightly bent please just bend it back into shape by laying on a a flat surface and pushing down onto it. You may need to wiggle it slightly by hand.
All kits are fresh from the moulds and require a certain degree of tidying up. You will need to use a pair of fine snips and a miniature file to remove and smooth any casting spurs. 
We advise that all metal kits are painted with a metal primer before painting. We use a metal spray primer as it avoids lumps and brush marks. 
We monitor stock levels of the items but occassionally we shall run low which means making more and this might delay the despatch date by a few weeks. If this is an issue please let us know. 
Glue kit together using superglue and superglue activator